Configura
Comfort 1
®
13. Storage and Transport
14. Product Disposal
15. Troubleshooting
Do not store or use the chair in damp or wet areas. Do not position the chair near or against sources
of direct heat or naked flames. Cover materials may fade or degrade if subjected to excessive heat
or sunlight.
Disposal of this product should be in accordance with local regulations.
The steel frame and the cardboard packaging can be recycled. The actuators, transformer, handset
and cables are electrical equipment and should be collected separately and disposed of in an
environmentally correct manner. The upholstery parts cannot practicably be recycled.
The backrest, side pieces and overlay cushion can be easily removed without tools. This is a good
opportunity to access all the areas of the chair where debris can accumulate. For details on how
to dismantle the chair consult the Service Manual.
The chair can be disassembled (e.g. for transportation). The chair must be disassembled /
assembled only by trained service personnel.
Storage
Transporting the chair
Disassembly Information
•
If you notice that the chair is not fully operating contact Accora Customer Service on 01223
206100.
•
Only use the transformer supplied with the chair or a replacement supplied by Accora.
•
Always disconnect the chair from the power supply before checking any part of the chair.
•
Do not use the product if any of the power cables are damaged.
•
Avoid moving the chair whilst a person is sitting on it.
WARNING
!
