Configura
Comfort 1
®
Reversing the Armrests
Seat Overlay Options
The armrests can be reversed. The right armrest can be fixed on the left side of the chair and the
left armrest can be fixed on the right side of the chair. This procedure reduces the inside distance
between the armrests
by approximately 40 mm (1.5”).
The seat overlay has an integrated Visco foam insert which comes as standard.
The foam insert can be replaced by an equivalent foam insert which is 457 mm x 457 mm x 76
mm (18” x 18” x 3”).
Please Note:
A replacement seat cushion insert must be fitted by trained personnel only. Please
contact your Occupational Therapist or Service personnel
Please Note:
Reversing the armrests must be carried out by trained personnel only. Please ask
your Occupational Therapist or Service personnel.
Make sure a replacement insert foam is the correct size to fit
the overlay and has the correct support properties to give the
user the correct support and pressure care.
WARNING
!
Figure 6 - Standard Position
Figure 7 - Reversed Position
