Configura
Comfort 1
®
Fitting / Adjusting Backrest Pillows
Pillow Filling Adjustment
Using other Mobility Aids with the Chair
There are three backrest pillows fitted to the chair using the hook and loop fasteners on the
backrest. The middle and bottom pillows are the same size and can be interchanged. The top
pillow is a different size and must always be used in the top position.
The middle and lower pillows can be re-arranged depending on the needs of the user. The pillows
can be positioned vertically instead of horizontally as shown below:
The pillow filling quantity can be adjusted to improve user comfort. If a pillow needs to be
adjusted, please contact your Occupational Therapist or Service personnel.
Standard Pillow
Position
Vertical Middle and
Bottom Position
The Configura® Comfort 1 Chair has been designed to enable other mobility aids, such as transfer
aids to be used with the chair. When using any other product with the chair a full risk assessment
must be carried out and the instructions for use of the equipment must be adhered to.
Figure 8 - Fitting / Adjusting Backrest Pillows
