Configura
Comfort 1
®
9. Battery Operated Reset System
The Configura® Comfort 1 Chair includes a Battery Operated Reset System. This system is for
emergency use only and will enable the operator to return the chair to the normal upright position
in the event of a mains power failure.
To use the Battery Operated Reset System, two 9V Alkaline batteries must be installed into the
battery compartment of the Transformer.
The Battery Operated Reset System is now ready to be used when needed.
•
The battery system will only return the chair to the upright position. It will not raise the
chair.
•
Only use Alkaline 9V batteries. Other types of 9V battery may not operate the reset
system. Accora recommends that the batteries are replaced regularly.
•
Do not use the chair in general use using the batteries. They are designed for emergency
use only.
1. Unplug the mains cable from the power socket.
2. Turn the Transformer over and slide the battery compartment lid open.
3. Install 2 x 9V Alkaline batteries into the compartment.
4. Slide the battery compartment lid closed.
5. Turn the Transformer back over so that the DC power light faces upwards.
6. Plug the mains cable back into the power socket and switch the socket on.
WARNING
!
To install the batteries into the Transformer:
