EM TEST (Switzerland) GmbH
CWS500 N1.3 / N1.4
User manual
V 1.01
37 / 47
8.2.
Test Setup with injection clamps (EM and BCI)
Fig 8.3 :Test Setup using Injection clamps
The
CDN
-side has no special requirements for the connected AE unit. The AE is placed 10cm above the
reference ground plane.
The other side of the
EM-clamp
needs asymmetric impedance with 150
. The AE 2 is once to terminate
with a 50
loaded CDN (see CDN 2). Other lines of the AE must be decoupled.
Fig 8.4 :Example Setup using EM clamp
Fig 8.5 :Example Setup using BCI clamp
