8X DDS DVD
±
R/RW Drive
5
5. If you have a sound card that can be connected to the drive, you can
also connect the drive (as Audio-Out) and the sound card (as Audio-
in) with a 4-pin audio cable.
If your motherboard is integrated with built-in sound system, plug the
4-pin audio cable into the CD-IN connector on the motherboard as
Audio-in.
6. Connect the USB cable at the back of the drive to the USB header
on the computer’s motherboard. The red wire of the cable needs to
be plugged into Pin 1 on the board. I
This drive supports USB
2.0
and if you connect to USB 1.1 connector,
only transfer rate of USB 1.1 will be available.
If the connection is correct, the lower right LED on the front panel will
light
green
.
7. Re-attach the cover of the computer, and reconnect the power cord
and all cables to the computer.
USB Header
2 / 7
White/D-
Braided Shield Ground
Error-Proof Pin
Black/Ground
Green/D+
5
10
4 / 9
3 / 8
Mother
Board
Signal
Red/Vcc
Pin#
1 / 6
IDE
Red Wire
Error-Proof Pin
USB
Red Wire
