Page 8
SPCL36104-S Suction System
3.1.12 The blue “E-STOP RESET” illuminated pushbutton is used to enable the Emergency
Stop Relay (ESR) and apply power to all motion control components. This operator
illuminates when the circuit is energized and in a normal operating mode.
3.1.13 The “BLAST ELAPSED TIME INDICATOR” records the total time that nozzles are
blasting. The “BLAST” selector switch must be in the “ON” position for this
hourmeter to run.
3.1.14 the white “TRY” illuminated pushbutton is to be used to verify the presence or lack of
power when the main disconnect is turned off and locked out for service.
3.1.15 (remote) an additional “EMERGENCY STOP” pushbutton station is located near the
loading door of the machine. Pressing this will disengage the ESR and remove power
from all motion devices and their respective controllers. This operator will illuminate
when pressed and remain lit until power is removed or the operator is reset.
3.1.16 (remote) A green Tower Light is used to alert the operator to the run condition of the
process cycle. A steady green light indicates that the current cycle is in process. A
blinking green light indicates that the system is in a hold state. When the light is
extinguished, either the cycle is complete or the system is waiting for the next cycle to
be run.
