background image

Page 1

INSTALLATION  INSTrucTIONS 

AND  OwNer'S  MANuAL 

DO NOT ATTeMpT TO MODIfy Or ALTer The cONSTruc-

TION Of The fIrebOx Or ITS cOMpONeNTS. ANy MODI-

fIcATION Or ALTerATION Of cONSTrucTION MAy vOID 

The wArrANTy Of ThIS fIrebOx.
chILDreN AND ADuLTS ShOuLD be ALerTeD TO The 

hAzArDS Of hIgh SurfAce TeMperATure AND 

ShOuLD STAy AwAy TO AvOID burNS Or cLOThINg Ig-

NITION.
yOuNg chILDreN ShOuLD be cArefuLLy SupervISeD 

wheN They Are IN The SAMe rOOM AS The fIrebOx.

fOr uSe ONLy wITh A LISTeD gAS-fIreD uNveNTeD 

DecOrATIve rOOM heATer NOT TO exceeD 40,000 

bTu/h.

DO NOT buILD A wOOD fIre.

uNIverSAL fIrebOx fOr ALL 

veNT-free LOg SeTS

MODeLS

VFP32FB2DL-4

VFP36FB2DL-4

VFP42FB2DL-4

VFP32FB2CL-3

VFP36FB2CL-3

VFP42FB2CL-3

VFP32FB2EL-3

VFP36FB2EL-3

VFP42FB2EL-3

VFP32FB2DF-4

VFP36FB2DF-4

VFP42FB2DF-4

VFP32FB2CF-3

VFP36FB2CF-3

VFP42FB2CF-3

VFP32FB2EF-3

VFP36FB2EF-3

VFP42FB2EF-3

wArNINg:  Improper installation, adjustment, alteration, 

service or maintenance can cause injury or property dam-

age. refer to this manual. for assistance or additional infor-

mation, consult a qualified installer, service agency or the 

gas supplier.

carefully review the instructions supplied with the decora-

tive type unvented room heater for the minimum fireplace 

size requirement.

DO NOT INSTALL A veNT-free LOg SeT IN ThIS fIrebOx, 

uNLeSS ThIS fIrebOx MeeTS The MINIMuM DIMeNSIONS 

reQuIreD fOr The INSTALLATION.

GAS-FIRED

ANSI z21.91 ventless fireplace enclosures for gas 

fired Decorative Type unvented room heaters

—  Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appli-

ance.

—  whAT TO DO If yOu SMeLL gAS

 

•  Do not try to light any appliance.

 

•  Do not touch any electrical switch; do not use any 

phone in your building.

 

•  Immediately call your gas supplier from a neigh-

bor’s  phone.  Follow  the  gas  supplier’s  instruc

-

tions.

 

•  If you cannot reach your gas supplier, call the fire 

department.

—  Installation and service must be performed by a quali

-

fied installer, service agency or the gas supplier.

wArNINg: If the information in these instructions are 

not followed exactly, a fire or explosion may result caus

-

ing property damage, personal injury or loss of life.

Installer: 

Leave this manual with the appliance.

consumer:  retain this manual for future reference.

EMPIRE

EMPIRE

Comfort Systems

Summary of Contents for VFP32FB2CF-3

























Reviews: