![background image](http://html1.mh-extra.com/html/empire-comfort-systems/dxl30in91n-2/dxl30in91n-2_installation-instructions-and-owners-manual_2404107014.webp)
34961-2-1015
Page 14
1. Place the bottom of the glass assembly into the firebox and
angle the top in.
CAUTION
Ensure the bottom glass clips engage to the glass assembly.
Figure 15
2. Secure the glass assembly in place with one hand.
3. Insert the Latch Tool into the firebox at the top and hook it
onto the right glass clip.
4. Using steady force, pull the latch out and up until it engages
to the glass assembly.
Figure 16
5. Repeat step 4 through 5 for the left glass clip.
CAUTION
Top glass clips are tightly sprung. If the Latch tool slips off of
the clip while pulling, injury may occur. Ensure that the latch
tool is completely hooked around the glass clips before trying
to engage the glass clips to the glass assembly.
GLASS & SCREEN ASSEMBLY PLACEMENT
6. Place the screen on the four pegs (two each side) on the
firebox. Secure with two screws (one each side) as shown in
Figure 17.
Figure 17