![background image](http://html1.mh-extra.com/html/empire-comfort-systems/dvp36dp31-series/dvp36dp31-series_installation-instructions-and-owners-manual_2404091065.webp)
31451-2-1013
Page 65
MAINTENANCE AND SERVICE
Reassembly and Resealing Gas Accumulation Relief System
Glass Frame Assembly and Combustion Chamber
Whenever the glass frame assembly is pivoted open by a delayed
ignition in the main burner, the glass frame assembly gaskets and
combustion chamber must be examined by a qualified service person
for damage. All damaged gaskets on the glass frame assembly
and combustion chamber must be replaced by a qualified service
person. If damage occurs to the combustion chamber, it must be
replaced by a qualified service person. Contact Empire Comfort
Systems, Inc. for replacement parts.
Glass Removal and Replacement
1. Remove decorative front doors (where applicable) by opening
and lifting straight up.
2. Remove decorative front by tilting lower portion forward to
release ball catch and lifting front off mounting bracket.
See
Figure 75.
3. Release two glass frame clamps at bottom of firebox.
4. Remove glass frame.
5. Place glass frame onto firebox.
6. Attach two glass frame clamps at bottom of firebox.
7. Replace decorative front by hooking front mounting brackets.
Be sure to lower front with slight angle to keep ball clasp from
scratching the front of appliance. Push in lower portion to lock
ball clasp.
See Figure 76.
8. Replace decorative front doors by aligning hinges over posts.
Figure 75
Figure 76
Summary of Contents for DVP36DP31 Series
Page 21: ...31451 2 1013 Page 21 Figure 30 Figure 31 Figure 32 EXAMPLES TOP VENT RUN...
Page 37: ...31451 2 1013 Page 37 Figure 57 DVVK 4FV DIRECT VENT TERMINATION KIT...
Page 47: ...31451 2 1013 Page 47 Figure 70 MILLIVOLT SYSTEM STANDING PILOT WIRING DIAGRAM...
Page 59: ...31451 2 1013 Page 59 INTERMITTENT PILOT CONTROL SYSTEM TROUBLESHOOTING...