Empire Comfort Systems DVP36DP31 Series, Installation Instructions And Owner'S Manual, Page: 7 / 76

31451-2-1013 Page 7
Remote Control Options
& Accessories
Description
FRBC Millivolt/IP Battery Remote ON/OFF
FRBTC Millivolt/IP Battery Remote Thermostat
TRW Millivolt/IP Wireless Wall Thermostat
TMV Millivolt/IP Reed Switch Wall Thermostat
FWS-1 Direct Ignition/Millivolt/IP Wall Switch
FREC Electric Remote
Venting
Options
Description
DVVK-4TSP
(DVVK-4TS)
Top Vent Kit (Horizontal) - 5" to 7" wall thickness
DVVK-4TP
(DVVK-4T)
Top Vent Kit (Horizontal) - 8" to 11" wall thickness
DVVK-4RP
(DVVK-4R)
Rear Vent Kit (Horizontal) - 5" to 7" wall thickness
DVVK-4VP
(DVVK-4V)
Vertical Vent Kit
DVVK-4F Horizontal Flex Vent Kit (4' Flex)
DVVK-4RE Horizontal Round Termination wall thickness (up to 13 3/4")
DV822 Vinyl Siding Kit for DVVK-4RE
DVVK-4FV Vertical Flex Vent Kit
DVEK-10 10' Vent Extension Kit
DVEK-25 25' Vent Extension Kit
NOTICE : Rear vent installation can only be vented on natural gas.
SPECIFICATIONS
DVP36 Nat Models
Input Btu/hr Maximum 25,000
Btu/hr Minimum (millivolt only) 18,000
KWH (Maximum) 7.3
(Minimum) 5.2
Orifice #41 (P-256)
Air Shutter Opening 1/8" (DVP36DP(3,7,9))
1/4" (DVP36DP5)
DVP36 LP Models
Input Btu/hr Maximum 27,000
Btu/hr Minimum (millivolt only) 21,000
KWH (Maximum) 7.9
(Minimum) 5.2
Orifice 1.55mm (P-258)
Air Shutter Opening FULL OPEN
DVP36 Nat and LP Models
Height without standoff 34 3/4"
Width 39"
Depth 19 7/8"
Gas Inlet Shutoff Valve (pipe) 1/2" NPT
NOTICE : Air shutter settings are factory minimum settings. Some
venting configurations may require minor air shutter adjustments
for optimum performance.