![background image](http://html1.mh-extra.com/html/empire-comfort-systems/dvp20cc-series/dvp20cc-series_installation-instructions-and-owners-manual_2404142003.webp)
30794-4-0513
Page 3
IMPORTANT SAFETY INFORMATION
Before enclosing the vent pipe assembly, operate the appliance to ensure it is venting properly.
DO NOT OPERATE THIS APPLIANCE WITHOUT GLASS FRONT PANEL INSTALLED
• Due to high temperatures the appliance should
be located out of traffic and away from furniture
and draperies.
• The glass front or any part removed for
servicing the appliance must be replaced prior
to operating the appliance. Work should be
done by a qualified service person.
• Keep burner and control compartment clean.
• Vent cap is hot while stove is in operation.
•
Installation and repair should be done by a
qUALIFIED SERVICE PERSON. The appliance
should be inspected before use and at least
annually by a qualified service person. More
frequent cleaning may be required due
to excessive lint from carpeting, bedding
materials, etc. It is imperative that control
compartments, burners and circulating air
passageways of the appliance be kept clean.
• Do noT
put anything around the stove that
will obstruct the flow of ventilation air.
• Clearance in accordance with local installation
codes and the requirements of the gas
supplier.
• Do
keep the appliance area clear and free
from combustible material, gasoline and other
flammable vapors and liquids.
• Do
examine venting system periodically and
replace damaged parts.
• Do
make a periodic visual check of pilot and
burners. Clean and replace damaged parts.
CAUTION
The glass used in your stove is tempered glass.
If the glass is cracked or damaged in any way, it
should be replaced only with a complete glass
frame assembly from Empire. See parts list on
Pages
38 and 40 for ordering.
• Do noT
use this stove if any part has been
under water. Immediately call a qualified service
technician to inspect the heater and to replace
any part of the control system and any gas
control which has been under water.
• Any safety screen or guard removed for
servicing an appliance must be replaced prior
to operating the appliance.
• This appliance must be installed on a flat, solid,
continuous surface (e.g. wood, metal, concrete).
This may be the floor, or it may be raised up on
a platform to enhance its visual impact. The
appliance may be installed on carpeting, tile,
wood flooring or other combustible material
as the appliance's base extends the width and
depth of the appliance.
• Children and adults should be alerted to the
hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition.
• Young children should be carefully supervised
when they are in the same room as the
appliance.
• Clothing or other flammable material should not
be placed on or near the appliance.
• Adequate accessibility clearances for servicing
and proper operation.
• This appliance must not share or be connected
to a flue serving a separate solid-fuel burning
appliance.
• Keep the area around your appliance clear
of combustible materials, gasoline and other
flammable vapor and liquids.
• Under no circumstances should any solid fuels
(wood, coal, paper or cardboard etc.) be used
in this appliance.
• The flow of combustion and ventilation air must
not be obstructed in any way.