31259-3-0114
Page 48
OPTIONAL MESH FIREPLACE SCREEN INSTALLATION
1. Remove the mesh screen from the package and lay it out on
a flat surface.
2. Starting at one end, thread the steel rod through the hog
rings located on top of the mesh.
3. Locate the three hangers located between the top of the
glass door and top outer wrapper. One is located in the
middle and one just inside of both the left and right sides of
the opening.
4. The hangers have a slot located in them. Simply slip the rod
into the slot and pull forward to drop into place.
5. The mesh will hang in front of the glass. Adjust the outside
edges to touch the side panels for the best appearance.
Figure 61
MESH SCREEN
HANGERS ARE
LOCATED INSIDE
THE TOP OPENING