![background image](http://html1.mh-extra.com/html/empire-comfort-systems/dvlt-series/dvlt-series_installation-instructions-and-owners-manual_2404083040.webp)
31259-3-0114
Page 40
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
RF VALVE OPERATION
(AF-4004 Electronic Gas Valve system only)
NOTICE
: THE FIREPLACE WILL ONLY OPERATE WITH THE
HAND HELD REMOTE TRANSMITTER. THE TRANSMITTER
CONTROLS ALL FUNCTIONS OF THE FIREPLACE.
Please refer to the separate instructions for detailed operation and
programming of the Multi-function Remote Control.
The AF-4004 Electronic Gas Control Valve features a Remote
controlled High/Low Variable - 6 Volt DC Motor Drive. This gas
control uses a spark to pilot burner assembly. For use with Pro-
pane or natural gas (pre-set at the factory).
This gas control system includes the items identified in
Figure 56.
3
ALL COMPONENTS ARE LOCATED IN THE LOWER
LEFT CORNER BEHIND REMOVEABLE PANEL
REMOVEABLE PANEL
◄
►
▼
▲
▼
►
►
►
Index No.
Description
1
Battery Back-up
2
AF Valve
3
Block Valve
4
AF Control Module
5
AF Extension Module
6
AC Adapter
7
Pilot Assembly - Nat
Pilot Assembly - LP
Figure 56
SPECIAL FEATURES ON THE CONTROL MODULE
The Control Module has two special pilot mode features built into
the system.
CONTINUOUS PILOT FEATURE:
This allows the user to change
from a spark to pilot system to a standing pilot system.
1. There is a switch located on the right side of the Control
Module (#4) that reads CONTINUOUS PILOT ON/OFF. This
switch will allow the user to select the pilot mode of operation.
2. When the continuous pilot switch is in the OFF position and
the appliance turned ON, the pilot will spark and light, then the
main burner will light as well. When the appliance is turned
OFF, the pilot and main burner will shut OFF.
3. When the continuous pilot switch is in the ON position and the
appliance is turned ON, the pilot will spark and light. Then when
the appliance is turned OFF the pilot will remain ON, but the main
burner will shut OFF.
Note: The Continuous pilot mode setting is generally recom-
mended on Direct Vent appliances during cold climate sea-
sons to help keep the firebox warm.
REMOTE CONTROL FEATURE:
The Control Module has a built
in remote control receiver which allows the user to program the
hand held remote transmitter.
1. There is a switch located on the right side of the Control Mod-
ule that reads REMOTE/OFF.
2. When the remote/off switch is in the OFF position the appli-
ance will operate from an appliance mounted rocker switch
(#3) or optional wall switch connected to the two BROWN
wires on the Control Module.
3. When the remote/off switch is in the REMOTE position the
appliance will operate from the Remote Control transmitter.
The Control Module must be programmed to the Remote Control.
1. To program, located the learn button on the left side of the
Control Module Note: Press and release the learn button.
There will be a beep sound from the Control Module, then
press any key on the remote transmitter. Once the internal
receiver accepts the transmitter code there will be a series of
confirming beeps.
2. The remote system is ready for use. Please refer to the sepa-
rate Multifunction Remote Control Instruction manual for pro-
gramming and detailed operational information.
REMOTE CONTROL OPERATION
1. The MODE button toggles between ON, THERMO and OFF.
2. The FLAME MAIN button will control the level of the torch
burners on the DVLT or the burner in front of the large rear log
on the DVTT with level 7 being the largest flame and level 1
shutting off the flame.
3. The LIGHTS button will control the level of intensity of the me-
dia light on the DVLT or the overhead light of the DVTT with
level 6 being the brightest and level 0 being off.
4. The FLAME REAR and the FAN button are not active func-
tions of this fireplace.
POWER SUPPLY SYSTEM
The Gas Control system is powered by a standard 110 volt AC
through a 6.0 volt DC adaptor. The AC adaptor is connected to the
Control Module with two 1/4” female terminals.
This control system also includes a Battery Back-up pack that al-
lows the Gas Control system only to operate in the event of a
power outage.
Notice
:
The Accent Light and/or Blower features will not operate
during a power outage.
Notice
:
All Batteries should be replaced at least once each year,
preferably at the beginning of the heating season.
CAUTION
Fire or explosion hazard. Can cause property damage, sever
injury or death.
Do not attempt to take apart the gas control or to clean it. Im-
proper assembly and cleaning can cause unreliable operation.