Page 53
CAUTION
The transmitter and receiver are radio frequency devices.
Placing the receiver in or near metal may severely reduce the
signal range.
Attention:
•
Turn OFF the main gas supply of the fireplace during
installation or maintenance of the receiver.
•
Place the receiver's 3-position slider switch in the OFF
position during installation or maintenance.
•
Turn OFF main gas supply to the fireplace prior to
removing or reinserting the batteries in the receiver.
WARNING
Fire Hazard. The Receiver lights the fireplace. The fireplace
can turn on suddenly. Keep away from the fireplace burner
when operating the remote system or activating manual bypass
of the remote system.
WARNING
Property Damage Hazard. Excessive heat can cause property
damage. The fireplace can stay lit for many hours. Turn off the
fireplace if it is not going to be attended for any length of time.
Always place the Transmitter where children can not reach it.
USING THE REMOTE CONTROL
Transmitter (Remote Control with LCD Display)
The Proflame Transmitter uses a streamline design with a simple
button layout and informative LCD display (Figure H).
The Transmitter is powered by 3 AAA type batteries. A Mode
Button is provided to Index between the features and a
Thermostat Button is used to turn on/off or index through
thermostat functions (Figures H and I).
Blue LCD Display
UP/DOWN Arrow Button
ON/OFF Button
THERMOSTAT Button
MODE Button
Figure H - Proflame Transmitter (Remote Control)
Figure I - Transmitter LCD display
Summary of Contents for Boulevard VFLL60FP90LN-1
Page 59: ...Page 59 ...
