Page 52
36776-4-0117
LED Brightness Button
Press the LED Brightness Button to activate the LED lights and
to cycle LED Intensity from High to Low to Off.
1 – On – High
2 – Medium
3 – Low
4 – Off
Use the Brightness Button in conjunction with the Mode Button to
create unique looks.
If no change is made to the LED lights, they will turn off
automatically after two hours.
Lights will remember the last Mode when turned on again. (After
a power failure, you must reset the lights to the desired Mode.)
Turn off the LED Lights when not in use.
LED Mode Button
Press the Mode Button to adjust LED light system from Automatic
Color Changes to Individual Colors.
1 – Auto-cycle – Rapid
2 – Auto-cycle – Gradual
3 – Pause Auto-cycle
4 – Deep Blue
5 – Royal Violet
6 – Cardinal Red
7 – Sea Green
8 – Forest Green
9 – Tranquil Blue
10 – White
Note:
LED lights will automatically turn off after two hours.
REMOTE
RECEIVER
SWITCH
- ON
- REMOTE
- OFF
LED
BRIGHTNESS
BUTTON
- High
- Medium
- Low
- OFF
LED MODE
BUTTON
Figure F
LED & FIREPLACE WALL CONTROLS
BATTERY REPLACEMENT
To replace the batteries in an intermittent unit, follow these steps:
1. Remove the cover from the electrical box on the wall.
2. Replace the batteries inside the box.
3. Replace the cover.
REMOTE
SWITCH
LED SWITCH
ON-OFF
LED SWITCH
COLOR MODE
COVER PLATE
Figure G
Summary of Contents for Boulevard VFLL60FP90LN-1
Page 59: ...Page 59 ...
