Empire Comfort Systems Boulevard VFLL60FP90LN-1 Manual Download Page 9

Page: 9 / 60

Page 9

ACCESSORIES

Part Number

Description

VFLL60

VFLL72

DG1CLF

Decorative Glass, Crushed - 1/4 inch Clear Frost (One kit per one square foot) Recommended

DG1BKP

Decorative Glass, Crushed - 1/4 inch Black Polished (One kit per one square foot)

DG1BUC

Decorative Glass, Crushed - 1/4 inch Blue Clear (One kit per one square foot)

DG1BCR

Decorative Glass, Crushed - 1/4 inch Copper Reflective (One kit per one square foot)

DG1BZR

Decorative Glass, Crushed - 1/4 inch Bronze Reflective (One kit per one square foot)

Notice

Decorative crushed glass is required for installation. Clear Frost Crushed Glass is recommended. Decorative Glass Droplets

cannot be substituted for crushed glass. One box of crushed glass covers 1 sq. ft. Glass colors may be mixed, however transparent

and translucent crushed glass will allow LEDs to better shine through.

Notice

Requires five square feet for VFLL60, six square feet for VFLL72.

Notice

Never place media material on or next to the burner.

Part Number

Description

VFLL60

VFLL72

DFL601BL

DFL721BL

Decorative Front, Beveled, 1-inch, Black

DFL602BL

DFL722BL

Decorative Front, Beveled, 2-inch, Black

DFL602NB

DFL722NB

Decorative Front, Beveled, 3-inch, Brushed Nickel

VBP60LKR

VBP72LKR

Liner - Black Reflective

VBP60LSS

VBP72LSS

Liner - Stainless Steel

LS60DF

LS72DF

Log Set

DG1AB

Decorative Glass Droplets - 1/2 inch Aqua Blue (One kit per one square foot)

DG1GC

Decorative Glass Droplets - 1/2 inch Glacier Ice (One kit per one square foot)

DG1SL

Decorative Glass Droplets - 1/2 inch Sangria Luster (One kit per one square foot)

DG1NXS

Decorative Glass Drops - 1 inch Onyx Solid (One kit per one square foot)

DG1TZC

Decorative Glass Drop - 1 inch Topaz Clear (One kit per one square foot)

DRFPA

Decorative Rock, Ceramic Fiber - Pebble (One kit per 1/2 square foot)

Notice

If installing a decorative front, an offset between the finishing materials and fireplace opening is required. Refer to page 25 and

29 as well as the installation instructions provided with the decorative front for more information.

Required Accessories

Optional Accessories

Summary of Contents for Boulevard VFLL60FP90LN-1





























































Search results

Summary of Contents for Boulevard VFLL60FP90LN-1

Reviews:

Related manuals for Boulevard VFLL60FP90LN-1

Brands by name

Popular brands

Empire Comfort Systems Boulevard VFLL60FP90LN-1, Manual

Search results

Summary of Contents for Boulevard VFLL60FP90LN-1

Reviews:

Related manuals for Boulevard VFLL60FP90LN-1

Brands by name

Popular brands