11
DO NOT use drug suspensions.
DO NOT use a Patch that appears altered or damaged.
DO NOT apply Patch to dirty, oily or lotioned skin.
Use of tap water or non-chloride drug solution on positive polarity
may cause tattooing or staining.
5. Make sure that the treatment site has intact skin.
CAUTION: Failure to follow these guidelines may result in skin
irritation or burns.
WARNING: DO NOT apply the Patch over damaged or denuded
skin or other recent scar tissue, skin with ingrown hair, pimples,
sunburned skin, razor nicks or skin with wounds that have not healed.
6. Remove the adhesive release liner from the hydrated Patch.
7. Apply the hydrated Patch so that the drug pad is over the treatment
site and secure it by pressing the adhesive border. Avoid pressing
directly over the pads. Pressing directly on the pads can cause
leakage that will compromise adhesion to the patient.
NOTE: DO NOT tape or bind the Patch during treatment. Do not apply hot
or cold therapy over Patch during treatment.
ADMINISTERING TREATMENT
The Hybresis System is designed to provide the following three treatment
options:
Hybresis Treatment
The Controller delivers current at 3 mA to the Patch for three minutes for a
Skin Conductivity Enhancement (SCE), followed by the patient wearing the
Patch for approximately one to two hours, resulting in a 40-80 mA-minute
treatment respectively.
