empeg car, User Manual

Page: 28 / 50

seven: optional tuner module
The tuner module is an optional unit that stays in
the car with the docking sled. A full installation
guide is included with the module.
You can access the tuner by pressing on the remote
control, or selecting tuner in the source menu.
Tuning
To enter a specific frequency using the numeric
keypad, press on the remote control. Omit any
points – the tuner will work them out for itself. For
example, entering ‘1036’ will tune to 103.6.
Press again to confirm and tune to that frequency.
Use the buttons to fine tune in .10MHz steps.
Presets
The tuner has three banks (A, B and C) of ten (0-9) presets.
Move through the presets by pressing a number button
on the remote or using the buttons.
Move to a different bank of presets by pressing the
button.
To store a preset, press . Use to select a bank
and then select a preset number. Then enter the
name. See section six for how to use the
alphanumeric keypad. To cancel saving a preset, press
on the remote control.
empeg car user guide 27
DNPP
TUNER
AM
–
FM
+
DIRECT
OK
DIRECT
OK
TUNER
+ –
TUNER
Radio display with RDS
Frequency input box
Preset name input box
Stereo
RDS available
Signal strength
Frequency
RDS radiotext
Preset bank
and number
Station or
preset name