empeg car, User Manual

Page: 36 / 50

empeg car user guide 35
appendix a: technical specifications
Hardware
Processor 220MHz StrongARM S-1100-DA
Flash memory 1Mb
RAM 12Mb 60ns FPM
DSP SAA7705H
DACs 16 bit sign-magnitude, fourfold oversampling digital
filters, noise shaping
Display 128 x 32 dot matrix vacuum fluorescent display, 2 bits
per pixel
IR SIR IrDA I/O, Consumer IR input
Controls 4 pushbuttons, 1 push
HDD port ATA 2.5" HDD standard 2MM header
HDD physical ATA 2.5" HDD up to 19.5mm, corner mounting screws
Serial IO 9-pin PC serial port, data rate to 230Kbits/s, also
docked in-car
USB 12Mbit/s standard type B socket on head unit
Ethernet 10BaseT RJ45 socket on head unit
Power input +12V on ISO connector fused at 3A with inline
fuseholder
Grounding Negative earth only
Auxiliary ctrl output +12V @ 1A maximum on ISO connector
Audio outputs 4V line level front & rear stereo phono (RCA) line jacks,
1V stereo phono (RCA) sockets on head unit
Audio inputs 1V line level stereo phono (RCA) line jacks
Other features On board temperature sensor
Software controlled display brightness
Display night mode input
Audio mute input (for mobile phones)
Optional Tuner Module