manualshive.com logo in svg

eMotions Embroidery Machine, User Manual

Share
Download
eMotions Embroidery Machine User Manual Download Page 30

eMotions   TM 2005 Blosil Enterprises, LLC.  Produced under License by OESD, Inc. All manual contents © 2005 OESD, Inc.

30

Thread Tension Adjustment

Thread tension can be adjusted from either the top thread tension 

adjustment or the bobbin case screw adjustment.  If you see 
bobbin thread on top, you may need to adjust the tension.  
However, before you adjust anything, check to see if the thread 
may be caught and not feeding properly.  Next, check to see if the 
machine is threaded correctly.  Change the needle.  This could also 
affect the tension.  Adjust the tension only if these suggestions do 
not correct the problem.  

Adjust Upper Thread Tension

When making tension adjustments, always start with the top thread.   If 

bobbin thread is showing on the top of the design, this means that 
the tension on the top thread is too tight or the bobbin adjustment 
is too loose.  To loosen the top thread tension, rotate the Thread 
Tension knob to the left (to a lower number).

If the stitches are not setting properly in the fabric or if loops appear, 

you may need to adjust the tension so that it is tighter.  First check 
to see if the machine is threaded correctly before making any 
adjustments.  If threading is correct, turn the Thread Tension knob 
to the right (to a higher number).

 The standard position of the tension should be between 4 and 6 as 

noted in the dark area of the Thread Tension knob.

O

p

e

ra

tio

n

eMotions Manual 7x9.indd   30

7/22/2005   11:11:19 AM

Summary of Contents for Embroidery Machine











































Reviews:

No comments

Brands by name

Popular brands

Load more brands