manualshive.com logo in svg

eMotions Embroidery Machine, User Manual

Share
Download
eMotions Embroidery Machine User Manual Download Page 28

eMotions   TM 2005 Blosil Enterprises, LLC.  Produced under License by OESD, Inc. All manual contents © 2005 OESD, Inc.

28

Sew the Design

Now that you have the hoop positioned where you want the design to 

start you are ready to sew the design.

1.  After threading the needle, place the thread through the hole in 

the presser foot from top to bottom and gently pull the end of the 
thread (See figure 1 above).  

 

2.  Lower the presser foot and hold the thread in your left hand.  If you 

do not hold the thread taut, you may get a thread break error (E13).  
Press the START/STOP button to start the machine.  After sewing 
5-6 stitches, stop the machine by pressing the START/STOP button 
and raise the presser foot again.  Clip the beginning thread tail 
close to the fabric. Do this when starting each color.

  TIP:  Make sure you are trimming the thread tail and not the sewing thread closest to the needle.

O

p

e

ra

tio

n

eMotions Manual 7x9.indd   28

7/22/2005   11:11:18 AM

Summary of Contents for Embroidery Machine











































Reviews:

No comments

Brands by name

Popular brands

Load more brands