manualshive.com logo in svg

eMotions Embroidery Machine, User Manual

Share
Download
eMotions Embroidery Machine User Manual Download Page 26

eMotions   TM 2005 Blosil Enterprises, LLC.  Produced under License by OESD, Inc. All manual contents © 2005 OESD, Inc.

26

Align Design

Designs, in most cases, start and stop at the center of the design.  The 

eMotions machine is programmed to start and stop in the center 
unless you specify otherwise in Explorations Lite software.  When 
hooping your fabric to be embroidered you will need to mark 
where you want the center of the design to start.  If you don’t get 
the fabric centered exactly in the hoop, you can reposition the 
needle in the hoop to some degree depending on the size of the 
design.

Once you have selected your design, you will see that the illumination 

has changed on the keypad from Select to Align   allowing you to 
use the arrow keys to move the needle position of the start of the 
design around in the hoop.  You must have the presser foot lever in 
the upper position to move the needle position.  (E15 will appear 
in the LED screen if the presser foot lever is in the lower position.  
Raise the presser foot and Press the arrow button again.)

    

To center the design in the center of the hoop, use the Home button 

. 

 

This positions the hoop so that the needle is in the center of the 
hoop. 

To move the needle position to the left in the hoop, use the left arrow 

. 

 

If you try to move too far, you will get an error (E25).  This means 
that the machine cannot sew the design any further to the left.  If 
the design needs to start closer to the left, you will need to re-hoop 
the fabric.  

To move the needle position to the right in the hoop, use the right 

arrow  

.  If you try to move too far, you will get an error (E26).  

This means that the machine cannot sew the designs any further 
to the right.  If the design needs to start closer to the right, you will 
need to re-hoop the fabric.

O

p

e

ra

tio

n

eMotions Manual 7x9.indd   26

7/22/2005   11:11:17 AM

Summary of Contents for Embroidery Machine











































Reviews:

No comments

Brands by name

Popular brands

Load more brands