2
1
2
3
GB | LED Night Light
Light with PIR sensor and night sensor (photo-diode) is the ideal solution for
children's rooms, halls, basements, closets and other rooms. Turns light on and off
automatically based on evaluation of input from photo-diode and PIR motion detection.
Specifications
Light source: 3 W COB LED
Power supply: 3× 1.5 V AA
Time delay: 25 s ±2 s
Detection range: 0–10 m
Detection angle: 120°
Material: ABS plastic
Light sensitivity: <10 lux
Modes: ON/OFF/AUTO
Instruction Manual
1. Remove the ball portion of the light from the holder. (see Fig. 1)
2. Separate the central portion of the light by turning counter-clockwise.
3. Open the battery compartment and insert 3× 1.5 V AA batteries. (see Fig. 2)
When replacing the batteries, make sure to always observe correct polarity.
All batteries must be replaced with new ones at the same time.
4. Close the battery compartment.
5. Set the mode of choice
OFF mode – the light is turned off.
ON mode – the light will be permanently on.
AUTO mode – the light will turn on/off via the PIR and night sensor. When the intensity
of ambient light drops below 10 lux, or a person approaches within 0–10 metres,
the LED light will automatically turn on. It automatically turns off 25 seconds after
the person leaves the area.
6. Put both parts of the light back together by turning clockwise.
