Manual Twin Nitro v. 1.4
68
• The parking brake consists of moving parts and requires regular maintenance for
correct function.
• To ensure effective functioning always make sure that the parking brake is well
lubricated. Immediately remove sand, snow, ice and dirt from any moving part of
the braking system.
• Use a silicon or oil based lubricant to lubricate the brake pedal, wheel axle and
brake pins on both sides of the parking brake at least once a month. Also
lubricate the release mechanism on the wheels on a similarly regular basis.
•
If you use your Emmaljunga pram/stroller on sandy beaches or under other dirty
and wet conditions make sure to take extra care of the parking brake and
maintain the braking system and wheels as detailed above whenever needed.
Care and maintenance
Washing instructions
• Hood:
Remove and extend the hood. Shower the hood from the inside (interior fabric) with lukewarm water. Use
mild liquid soap as detergent. Cleanse thoroughly. Drip dry the fully extended hood.
• Seat fabric and five point harness:
Remove the seat fabric from the chassis. Hand wash the seat fabrics in lukewarm water. Use mild liquid
soap as detergent. Cleanse thoroughly. Drip dry the seat fabric. Only wipe the nylon straps and plastic
parts clean with a damp cloth (do not hand wash). Make sure the harness is dry before reassembly.
• Bumper bar fabric:
Remove the bumper bar fabric from the bumper bar. Hand wash in lukewarm water. Use mild liquid soap
as detergent on the exterior surface of the bumper bar fabric. Handle the non-woven interior material with
care. Drip dry.
General Information
• Ironing: If any fabric part needs to be ironed, always use a 100% cotton cloth between the iron and the
fabric to protect the fabric surface. Iron the exterior fabrics (100 % polyester) and the interior fabrics (65%
cotton and 35% polyester) on gentle heat (110°C on the iron).
• Make sure that all parts are completely dry before reassembly. Check the trimmings and the seam on the
seat fabric underneath the backrest pocket.
• You may apply a material protector (like Scotchgard™) on the exterior fabric after washing. Always apply
before reassembly.
WARNING
• Do not place the child/children in the stroller for at least 24 hours after applying a material protector.
Reassembly after washing
WARNING
• Make sure all parts are assembled correctly according to the instructions in this manual.