11
12
19
20
21
15
23
24
22
14
1
3
2
13
Manual Twin Nitro v. 1.4
64
Assembly of the pram
Assembly of the hood
• Fasten the two plastic hooks (19) on the hood apron to the metal
bar (20).
IMPORTANT
• The hood should always be assembled when the pram is used and
the hooks should be attached.
Assembly of Apron (Accessory)
• Slip the apron over the footrest and pull it up toward the front of the
hood. Secure the apron with the four poppers (two on each side of
the hood).
IMPORTANT
• The hood cannot be pushed back with the apron attached.
WARNING
• Never pull a pram with swivel front wheels behind you, if the front
wheels are not locked. The pram might self turn which can lead to a
safety risk if you are not cautious and attentive.
Adjusting the angle of the seat unit
• Adjust the angle by pulling the grey tab (22) outwards and twisting
the knob until the grey button locks into the desired position (1, 2
or 3). Repeat this on the other side of the chassis. Make sure the
knobs are in the same positions on both sides of the chassis.
• Remove your child from the pram before adjusting the angle.
• Adjust the angle when the chassis is folded to avoid unnecessary
wearing of the mechanism.
WARNING
• The mechanism must be in the same position on both sides of the
chassis to avoid uneven strain and possible damage to the chassis.
• Make sure the grey button has locked into position in order for the
mechanism to function properly.
Use of the raincover (no picture)
• The raincover is attached by placing the raincover over the seat
unit. Please note that there is an opening in the raincover near the
hood opening.
• Use the raincover that is supplied with the pram.
• Always use the raincover when it is raining or snowing. If the pram
is damp before the raincover is about to be attached, wipe off the
fabrics first if possible.
• Make sure the raincover is completely dry before it is placed back
into its bag.
• Make sure the raincover is removed from the pram after use in
order to avoid condensation forming between the raincover and the
pram as this could cause mould to form.
How to adjust the height of the handle
• Adjust the height by pressing the grey buttons on the inside of the
handle (23). Keep the buttons pressed in while you adjust the
handle to the required position (24).
How to use the pram