25
26
28
27
29
30
18
19
20
17
32
32
31
33
16
65
Manual Twin Nitro v. 1.4
English
How to use the pram
Engaging the parking device
• Engage the parking device by pushing the brake pedal down with
your foot (25).
• Disengage the parking device by pulling the pedal up.
WARNING
• Never leave the vehicle without first engaging the parking device.
• The brake should always be engaged when you lift your child in
and out of the stroller/pram.
• Avoid uphill or downhill parking.
• Make sure that the cogs are attached properly on both rear wheels.
• Make sure that the brake pin engages into the cogs when the
vehicle is parked.
The front wheels can be fixed or swivel 360 degrees
• The front wheels can be fixed by pressing the locking ring (26)
down when the wheels are positioned straight forward.
• The wheels can rotate freely 360 degrees by pulling the locking ring
up.
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Adjusting the footrest
• The footrest can be adjusted into two positions (27). Adjust the
footrest to the lower position by releasing the lock (28) on the side
of the footrest and pulling the footrest first upwards and then gui-
ding it downwards.
• The footrest can be adjusted by pulling the footrest upwards and
then pushing it horizontally back towards the pram.
• Make sure that the footrest is locked into the desired position be-
fore usage.
• The footrest pad is reversible.
WARNING
• Do not stand or climb on the footrest! The footrest can only be
used as a support for one (1) child’s legs or feet. All other usage
can lead to serious injury. Maximum load 3 kg.
Attaching and detaching the seat unit
• To attach the seat unit first engage the parking device. Hold the
seat unit at the armrests (29) and push the Easy Fix pieces into the
receivers (30) on both sides of the chassis until it locks into position
with an audible click.
• To release the seat unit first engage the parking device. Press the
Easy Fix buttons (29) on both sides and lift the seat unit straight up.
• The seat unit can be attached in both driving directions
WARNING
• Don’t allow any child to be placed in the vehicle when it is being
folded/unfolded.
• Hold the handles steadily until the seat unit is in place.
• Make sure that the seat unit is securely in place before you use the
vehicle.
• Never lift the seat unit when it is assembled on the chassis
Adjusting the five point harness
• Bring the crutch strap (31) forward between the child’s legs and up
toward the front of the waist. Insert the waist straps (32) into the
harness buckle until they click into place. Make sure that the waist
straps are fastened.
• Adjust all straps using the sliders (33).
• To release the shoulder and waist straps, press the buttons in the
centre of the harness buckle.
Attachment points are provided at the end of each waist strap for a
separate harness complying with BS 6684
WARNING
• Always use the harness when the child is placed in the vehicle.
Make sure that all buckles are fitted into position and that the
harness is attached to the vehicle.