13
14
18
15
17
16
8
7
6
9
10
63
Manual Twin Nitro v. 1.4
English
Assembly of the pram
• Pull the attachment strap on the seat fabrics around the armrests
frame below the bumper bar and attach it with the poppers (13).
• Repeat this on both sides of the seat unit (four poppers in total).
• Attach the poppers on both sides of the armrests (14) over each
side of the seat frame. There are two poppers on each side.
• Place the footrest pocket over the footrest and attach the poppers
through the holes of the bottom plate.
• IMPORTANT! Bring the crutch strap of the five point harness (15)
through the little opening in the footrest cover and through the seat
fabrics.
• The footrest fabrics are reversible
WARNING
• Never let the child/children stand on the footrest.
Assembly of the bumper bar (only when using the lift accessory)
• Place the bumper bar cover (16) around the bumper bar and close
the zipper.
• Attach the crutch strap (17) around the bumper bar.
Assembly of the bumper bar (only when using the lift accessory)
• Loosen the screws on both sides of the bumper bar with a screwdri-
ver. Keep the clamps and screws in a safe place for future assem-
bly.
Assembly of the hood
• Attach the hood to the pram body by pushing the plastic leg of the
hood into the plastic holders (18) on the pram body (one on each
side). Make sure they are securely in place.
• Secure the poppers on each side of the hood.
WARNING
• Always use the pram with the hood assembled.