Solutions for your measurements
www.emkometer.com
Page
13
of
32
Radar Level Meter EMKOTDR-60| Emkometer,
s.r.o., Na Žižkově 1245, Ledeč n/S., 58401, CZ
tel/fax: 569 721 622 | tel: 569 720 539, 569 721
549
|
8. S
et
-
up elements
Set the level meter using 3 buttons placed on the display module. All settings are accessible in the
EMKOTDR-
60 set-
up mode access.
button
•
Set
-
up
mode access
•
Confirmation
of selected
item
in
the menu
•
Move the cursor
in
the
line
•
Saving of set
-
up data
button
•
Move
in
the menu
•
Change
of values
button
•
Cancelling
of
carried
out changes
•
Shift
one level
up
*
Slow flashing while the reflected signal (echo) is received from the measured level.
The type of level meter EMKOTDR_ _-_-_-I-B is supplied without a display module DM-70. To set the
level meter it is required to join the display module. Once set, the display module can be disconnected
and the level meter can measure without him.
9. St
atus signalization
displej
funkce
„NO ECHO“
Lighting intermittently
– the level meter
is
not
able
to
receive
echo for
a long
time.
Incorrect
installation
of the level meter.
„NO PASSWORD“
It
will
appear
in
the
item
"MENU"
– the level meter
is
protected
using
a
password
against
unauthorised
setting.
Enter the correct
password.
„LOW POWER“
Low
supply
voltage level meter
Symbol
„T“
1)
Lighting permanently
–
"TEACHING"
mode
activation.
Symbol
„E“
1)
Lighting intermittently
– correct echo
receiving
(of
the reflected
signal)
from the measured surface level.
Symbol
1)
Lighting permanently
– level meter
is
locked
against
unauthorized
set-
tings
by
a
password.
You must enter the correct
password
to unlock
it.
1)
symbol appears in the lower left corner of the display
Display
of measured values
Set
-
up elements
Teaching
mode activation
Echo receiving
Lock of level meter
Warning signs
Units