2.3. Panel Mounting
During installation into a metal panel, care should be taken to avoid injury from
metal burrs which
might be present. The equipment can loosen from vibration and become dislodged if installation
parts are not properly tightened. These precautions for the safety of the person who does the
panel mounting.
The unit is designed for panel mounting.
1 – Insert the unit in the panel cut-out
from the front side.
2 – Insert the mounting clamps to the holes that
located top and bottom sides of device and
screw up the fixing screws until the unit
completely immobile within the panel
ENG EGG HATCHER 02 V01 04/16
8