1.4.Ordering Information
2. INSTALLATION
Before commencing installation:
• Disconnect all electrical power to the machine.
• Make sure the machine cannot operate during installation.
• Follow all of the machine manufacturer’s safety warnings.
• Read and follow all installation instructions.
A visual inspection of this product for possible damage occurred during shipment is recommended before
installation. It is your responsibility to ensure that qualified mechanical and electrical technicians install this
product.
Be sure to use the rated power supply voltage to protect the unit against damage and to prevent failure.
Keep the power off until all of the wiring is completed so that electric shock and trouble with the unit can
be prevented.
Never attempt to disassemble, modify or repair this unit. Tampering with the unit may results in
malfunction, electric shock or fire.
Do not use the unit in combustible or explosive gaseous atmospheres.
During the equipment is putted in hole on the metal panel while mechanical installation some metal burrs
can cause injury on hands, you must be careful.
Montage of the product on a system must be done with it’s own fixing screws. Do not do the montage of
the device with inappropriate fixing screws. Be sure that device will not fall while doing the montage.
It is your responsibility if this equipment is used in a manner not specified in this instruction manual.
Report any shortage or damage to your local sales office as soon as possible.
ENG EGG HATCHER 02 V01 04/16
5