EMKO EGG HATCHER, User Manual, Page: 35 / 36

11. SPECIFICATIONS
Device Type : Hatcher Control Device
Housing & Mounting : 96mm x 96mm x 87.5mm 1/4 DIN 43700 plastic housing
for panel mounting. Panel cut-out is 92 x 92mm.
Protection Class : IP65 at front, IP20 at rear
Weight : Approximately 0.4Kg.
Environmental Ratings : Standard, indoor at an altitude of less than 2000 meters with none condensing
humidity
Storage / Operating Temperature : -20 C to +70°C / 0 C to +50°C
Storage / Operating Humudity : 90 % max. (None condensing)
Installation : Fixed installation
Overvoltage Category : II
Pollution Degree : II. office or workplace, none conductive pollution
Operating Conditions : Continuous
Device Supply Voltage and Power : 100 - 240 V
V
(-%15 / +%10) 50/60 Hz. 7VA
24 V
V
(-%15 / +%10) 50/60 Hz. 7VA
24 V
Z
(-%15 / +%10) 7W
Analogue Sensor Inputs : 0-20mA
Z
, PT-100 (IEC751)(ITS90), PRONEM MINI
Accuracy : ± % 0,25 of full scale
Sensor Break Protection : Upscale
Max. Pulse Input Value for Fan : 30 000 rpm
Sampling Time : 100 ms
Input Resistance : For 0...20mA
Z
current input 100 Ohm
Digital Inputs : 500
V
isolated, NPN/PNP selectable
Nominal Input Voltage: 24 V
Z
Outputs : Relay, 0-20 mA or 0-10 V Analog Output
Analog Output : 0-20mA, 0-10V (maximum 10 mA)
Relay Output : Resistive Load 5A@250V
V
(Electrical Life : 100.000 operation – Full Load)
SSR Output: PNP(Source) type transistor output (Maximum 1A@24V
Z
)
Display : 320x240 pixel TFT LCD
Approvals : CE, EAC
ENG EGG HATCHER 02 V01 04/16
35