TB-6594
Page 10 of 12
© 2016 DESCO INDUSTRIES, INC.
Employee Owned
Use the procedure below to change the resistance limits
of the SmartLog Pro™.
1. Access the Administrator Menu by entering an
administrator ID number and PIN on the keypad.
2. Tap the Preferences button.
4. Adjust the Wrist Strap and Footwear Limits by
tapping the < and > buttons. Tap the Save button
when complete.
Figure 16. Locating the Preferences button in the Admin
Menu
3. Tap the ESD Test button.
Figure 17. Locating the ESD Test button in the
Preferences Menu
Figure 18. Locating the Wrist and Foot Limits in the
ESD Test Menu
TEAM5 Software
TEAM5 is the most powerful and accurate
ESD Test Acquisition Software on the
market. When used with the EMIT
SmartLog, TEAM5 allows manufacturers
and assemblers to automate the collection
of employee ESD testing. It has a set of robust
employee management functions that allow automated
tracking of employee leave time, shift and department
assignments and ESD training. TEAM5 connects
your ESD test data to the rest of your manufacturing
environment with automated electronic data interchange
in a variety of formats.
TEAM5 Software is required for every SmartLog system
installation. TEAM5 is compatible with the SmartLog
V5™ and SmartLog Pro™ systems.
See the
TEAM5 User Manual
for more information.
The software may be downloaded using the following
link:
http://emit.descoindustries.com/team5.aspx
NOTE: A license dongle is required to run the software.
Contact EMIT Customer Service to schedule an
installation session.
