9
|
ENGLISH
5.0 Manual settings
If you have not used the setup wizard, or you want to manually setup a password to
prevent third parties to gain access, or you want to manually set the date and time,
you can manually set the surveillance recorder. And, if your surveillance recorder has
been connected to your network, you can manually set the IP address data.
5.1 Setting up passwords
In order to prevent third parties gaining access to the settings of the surveillance
recorder, you can setup a password in the surveillance recorder. There are two
different types of accounts which can be used to setup a password. A user account
with a password and an admin account with a password. A user account is supposed
to be used for the ‘normal’ user which can only view images and cannot alter any
settings. If needed, you can also create a user account and add privileges you want to
add for this user account.
An admin account is supposed to be used for the person who is able to view and alter
all settings.
5.1.1 Setting up a user account
1. Make sure the surveillance recorder is completely started, and you can see the
surveillance recorder’s image on your screen.
2. Click ‘Start’.
3. Fill out the password you have set during the wizard and click ‘Login’ or do not fill
out a password if you have not used the wizard or if you do not have set a
password and click ‘Login’.
4. Click ‘Basic.
5. Click ‘User’.
6. Click ‘Add user’.
7. Fill out a user name for this account at ‘User name’. Use the mouse and the
onscreen keyboard to fill out the data and click ‘Enter’ to confirm.
8. Fill out a password for this account at ‘Password’. Use the mouse and the
onscreen keyboard to fill out the data and click ‘Enter’ to confirm.
9. Confirm the password at ‘Retype password’. Use the mouse and the onscreen
keyboard to fill out the data and click ‘Enter’ to confirm.
10. Click ‘Authority’.
11. If this account may only have access to the camera’s images (no privilege to
change anything), click ‘Clear’.
12. Click ‘Apply’.
13. Click ‘OK’ at the ‘successfully saved’ screen.
14. Click ‘Exit’ until you are at the ‘User’ menu.
Note: Your password may contain a maximum of 16 characters.
5.1.2 Setting up an admin account
1. Click ‘Add user’.
