5.The Concrete Explanation of Function Parameters
EM8 User's Manual
51
Multi speed
ACC/DEC Time
Speed 13
Acc/Dec time1(A-7,A-8)
Speed 14
Acc/Dec time1(A-7,A-8)
Speed 15
Acc/Dec time1(A-7,A-8)
The running mode, direction, and time of programmable multi-step speed can be set by parameter
C-14~C-35.
This parameter is used to set external command control mode.
Code
Name
Description
Factory setting
b-33
External running
command mode selection
0: Two-line control mode 1
1: Two-line control mode 2
2: Three-line control mode
0
Remark
●
Only set external control [A-3] = 1,2, this parameter is valid.
0: Two-line control model 1
(Inverter factory setting is this mode)
Command
Terminal state
Stop
Forward
Reverse
1: Two-line control model 2
Command
Terminal state
Stop
Run
Forward
Reverse
2: Three-line control model:
Three line control mode must choose a terminal of three line (refer to
b-63~b-69 explanation).
The wiring of three control model as diagram 5-18:
Diagram 5-18: The wiring of three control mode
