background image

 

Preface 

Thanks for your using EMHEATER EM-GU series motor soft starter, this product is used for three-phase squirrel 

cage induction  motor soft starting  and soft stopping  control.  Before using, please carefully  read and understand 

the contents of this manual. 

In the process of using the soft starter, please note the following Safety Clauses: 

  Please check this user manual carefully before using the product. 

  Only the technical person is allowed to install the product. 

  To be sure that the motor is correctly matched with the soft starter. 

  It is forbidden to connect capacitors to the output terminals (U V W). 

  Please seal the terminal switch insulation glue after finishing connect them. 

  The soft starter and its enclosures must be fixedly earthed. 

  During the maintenance and repair, the input must be off-power. 

 

 

PRODUCT UNPACKING INSPECTION 

Please check up the products before using, if in some problems; please do not hesitate to contact us with any 

request for additional information.   

 

Check-up the type of product whether it is the right one you order. 

 

Check  any  damage  to  the  product  because  of  the  transport,  such  as  the  spare  parts  are  apart  from  the 

main body or the shell be damage etc. 

 

Check others, including the user's manual. 

This user manual content may be changed due to technical reasons or modified. We reserve the updating right. 

 

 

Version 1.0.0 

Summary of Contents for EM-GU Series




























Reviews: