`
14
Ɣ
Place any other sample (ex. 500g) on the pan which you want to know how many the
sample is. The display will be show “25 pcs”. It means the sample as 500g is consisted of
25 pieces.
Note
: 1) Pressing “%/
▶
” key is possible to show unit weight, Total weight and the count
(pcs) by turns.
2) Press the “
COUNT /
▲
”
key to return to normal weighing.
6.6 Check-weighing/counting/percentage
Check-weighing is a procedure to cause an alarm to sound when the weight on the scale
meets or exceeds values stored in memory. The memory holds values for a high limit and a
low limit. Either limit can be used or both can be used. This function is available in weighing,
counting pieces and percentage.
Ɣ
Press the “
CHECK/
◀
”
key. The display will show the current High Limit with the left
most digit flashing and the “
HI”
symbol on the left of the display.
Ɣ
Input high limit value
The location of flashing digit is possible to move as “
CHECK
/
◀
”
and “
%/
▶
”
key. The
real value from “0” to “9” is possible to change as “
COUNT
/
▲
” key(ex. 3000g). After set
desired high limit value, press the “
TARE/Enter”
key to accept the value. if you want to
reset the value to zero, press “
UNIT/Clear”
key to clear the value
Ɣ
After set high limit value by pressing the “
TARE/Enter”
key, then the display will show
“
LO”
symbol on the left side.
859715-25-35 en ma 2012-07
