21
2. Press the
“TARE /Enter”
key in order to confirm and move to next setting.
7.4 Baud Rate setting
There are 4 options for baud rate option. You can select its options by pressing “
COUNT/
▲
”
key.
Options: 1200, 2400, 4800, 9600
(Default setting: 9600)
Press the “
TARE /Enter”
key in order to confirm and move to next setting.
7.
5 RS-232 transmission method in accumulation mode
For selecting output method through RS-232C during accumulating, there are 2 options.
You can select its options by pressing “
COUNT/
▲
”
key.
(Please refer to section 9.4)
Options : ACp on, ACp off
(Default setting: ACp on)
ACP on
When pressing “
M+/Exit”
key in order to add a data, an each of added
data (weight or count) will be transmitted and printed out.
Also, when pressing “
PRINT”
key, the total value will be transmitted.
ACP of
When pressing “
M+/Exit”
key in order to add a data, an each of
added data (weight or count) will not be transmitted and printed out.
Also, when pressing “
PRINT”
key, only the total value will be
transmitted.
Press the “
TARE /Enter”
key in order to confirm and move to next setting.
859715-25-35 en ma 2012-07
