19
7. USER PROGRAMMING FUNCTIONS
The scale has 8 parameters that can be set by the user. Press the “
COUNT/
▲
”
key for approx.
2 seconds to enter into Parameters Setting mode.
7.1 Backlight type
There are 3 options for backlight type. You can select its options by pressing “
COUNT/
▲
”
key.
Options: EL on, EL Au, EL off
(Default setting: EL Au)
EL on
Backlight ON: Backlight always is ON
EL Au
Backlight auto: Backlight will be going on automatically whenever the
scale is loaded by objects weigh greater than 9 display resolution or
any of keys is pressed. And it will be going off also automatically
approx. 5 seconds after the scale returns to zero.
EL off
Backlight OFF: Backlight always is OFF
Note
: The maximum battery life is achieved with the backlight turned off.
Press the “
TARE /Enter”
key in order to confirm and move to next setting.
7.2 RS-232 transmission method
There are 6 options for output transmission method. You can select its options by pressing
“
COUNT/
▲
”
key.
Options: AU on, AUL on , AU off, AUL off, P Cont, OFF
(Default setting: AUL off)
859715-25-35 en ma 2012-07
