13
Ɣ
Remove the 700g weight
Ɣ
Place a 200g weight on the pan, the display will show 28.57% as 200g is 28.57% of 700g.
Ɣ
Pressing the “
COUNT/
▲
” key will return the scale to weighing.
Note
: the scale may jump by large numbers unexpectedly if small weights are used to set
the 100% level. For example if only 23.5g is on a scale with 0.5g increments and the
scale is set to 100%, the display will show 100%, however a small change of weight
will cause the display to jump to 100.13%.
6.5 Counting pieces
Before beginning, if you want to use any container, use Tare function first.
Ɣ
Place samples (ex. 200g as 10pcs) on the pan. The number of samples should match the
options for parts counting: 10, 20, 50, 100, 200,500, or 1000 pieces
Ɣ
Press the “COUNT/
▲
” key to begin. Then the display will show
“
SP 10”.
To change the number of parts is possible as “COUNT/
▲
” key. It will cycle through the
options : 10, 20, 50, 100, 200, 500,1000
Ɣ
Press the “
TARE/Enter”
key when the number matches the number of parts.
859715-25-35 en ma 2012-07
