EMF Motor EMF SQML160 Series, Operating Instructions Manual

Page: 13 / 43

12
www.emfmotor.com
Drw-3
6- INSTALLATION
6-1 General
Contractor Company is responsible for all electrical connections, installation and
commissioning of the motor. These operations must be carried out by trained personnel.
Please contact EMF if you have any problems related with the motor.
WARNING!
Interventions on the lift motor and equipment will void the guarantee.
Before commencing the installation, the motor must be checked against transport
damages.
The ambient temperature of the motor must be 0 °C - +40 °C, excessive humidity or
water may cause motor failures.
The mechanical patented brake of the motor is TÜV (ABV 766 / 2) certified and its
settings must be made at our factory. The customer shall not make any further
adjustments.
CAUTION!
In case of any interventions on the setting screws on the brake, the brake
may malfunction and cause safety problems. Any intervention on the
motor brake will void the guarantee.
6.2 Recommendations for Installation
Motor and driver unit must be installed inside an appropriate structure or enclosed lift
cabin, and they shall be positioned so as to prevent excessive dust, liquids (water, oil,
etc) and foreign substances on the motor (See Chapter5.6).There must be sufficient space
around the motor for air circulation. The distance between the motor and the wall must
be 150 mm at least in order to access the encoder in case of need.
No welding process shall be carried out on the motor, nor the motor shall be used as an
grounding point for a welding process. This may damage the bearings and magnets of
the motor.