EMF Motor EMF SQML160 Series, Operating Instructions Manual

Page: 17 / 43

16
www.emfmotor.com
ERN487 (SinCos) Connection Diagram
U
p
: +5 VDC Supply
7- COMMISSIONING
Before commissioning, the installation of SQML lift motor must be completed with
attention to the conditions described in the previous sections.
The specifications of the driver used must comply with the values specified on motor
plate. Check the condition of the driver before connecting the power. In case of any
failure, the driver must not be installed.
Ambient Conditions:
• Motor and driver must be installed inside an appropriate structure or enclosed lift cabin.
• The installation must comply with the protection class. The motor must be protected
against falling of foreign materials (see Chapter 5-6).
• Do not operate the motor in explosive environments.
• The temperature must be between 0-40°C.
• Humidity ratio must not exceed 95% to prevent condensation.
• Altitude must not exceed 1000 m.
7.1 Power Connection
WARNING!
The motor must not be connected to the main grid without a driver! When
connecting to the motor driver, the U, V, W and motor grounding
connections must be made with a shielded cable of proper cross-section and
the shielding must be connected to the motor and driver.
The maximum cable length is 25 m, when used with a cable of proper cross-section.