EMF Motor EMF SQML160 Series, Operating Instructions Manual

Page: 8 / 43

7
www.emfmotor.com
Do not ignore the attractive force of the magnetic field and do not approach the motors
with tools or devices that might be affected by the magnetic field (watches, digital
devices, iron or steel tools).
4- STORAGE and TRANSPORT
WARNING!
If any damage is observed on the motor, do not start the motor. Check the
packing of the motor, and if you see any damage that might have occurred
during transport, report the situation to the transport company. Shipping
damages are not covered by our guarantee! Avoid excessive loads and
vibrations.
4.1 Storage
Please pay attention to the storage warnings on the packaging. The storage areas must
be moisture-free and thermally balanced. The storage must be away from chemical
reactions. The motor must be kept in its original packaging and away from moisture to
prevent rust until the installation.
The storage time should not be too long (Maximum 1 year is recommended). The brakes
must be released and the shaft must be manually rotated before the installation.
4.2 Transport
Do not store or transport the SQML motor which is removed from its packaging.
Damaged packaging must be replaced immediately. If the motors aren’t packed properly,
then they won’t be protected against sudden impacts. Dangerous and sudden actions can
cause accidents.
Use safety shoes and gloves during transportation. Maximum weight that the personnel
can carry must be considered. The motor and the equipments may be heavier than 13 kg.
Please use only lifting equipment with sufficient capacity during loading, unloading and
transport.
When you are lifting with the workshop hoist, only use the lifting eyelets on the block.
Please pay attention not to damage the motor with ropes and chains during loading,
unloading and transport, especially the brake and the encoder assembly must be
protected against sudden impacts.