Document Part # 026-4275 Rev 0
Page 20 of 23
©2019 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emerson.com for the latest technical documentation and updates.
Enable Synch
LOF
- LAN enable input
synchronization
Not used.
Light Synch
Lli
- LAN light output
synchronization
Not used.
Aux Synch
LAU
- LAN aux output
synchronization
Not used.
Stpt Shift Sync
LES
- LAN setpoint shift
synchronization
Not used.
Use Remote Disp
LSd
- Use display from LAN Not used.
SETPOINT STATUS Set point status
Reports active setpoint status on application Status screen. Update rate:
10 - 30 seconds. Can be pointed to for use in other applications. Logging
set by default. User can disabled logging.
LIGHTS OUTPUT
Reports light relay output
status
Reports light relay output status on application Status screen. Update
rate: 10 - 30 seconds. Can be pointed to for use in other applications.
Logging set by default. User can disable logging.
DEFROST END
Defrost End State
Reports active setpoint status on application Status screen. Update rate:
10 - 30 seconds. Can be pointed out for use in other applications. Logging
set by default. User can disable logging.
PROBE 1 TEMP
dP1
- Probe 1 temperature Reports temperature probe 1 status on application status screen. Update
rate: 10 - 30 seconds. Can be pointed out for use in other applications.
Logging set by default. User can disable logging.
PROBE 2 TEMP
dP2
- Probe 2 temperature Reports temperature probe 2 status on application status screen. Update
rate: 10 - 30 seconds. Can be pointed out for use in other applications.
Logging set by default. User can disable logging.
PROBE 3 TEMP
dP3
- Probe 3 temperature Reports temperature probe 3 status on application status screen. Update
rate: 10 - 30 seconds. Can be pointed out for use in other applications.
Logging set by default. User can disable logging.
PROBE 4 TEMP
dP4
- Probe 4 temperature Reports temperature probe 4 status on application Status screen. Update
rate: 10 - 30 seconds. Can be pointed out for use in other applications.
Logging set by default. User can disable logging.
FAN PROBE
Evaporator Fan Probe
Value
Reports configured fan probe value. If not set, a reading of
-32768 will log. Can be pointed out for use in other applications. Logging
set by default. User can disable logging.
DIGITAL INPUT 1
Reports digital input state
1
Reports digital input 1 status on application Status screen. Update rate: 10
- 30 seconds. Can be pointed out for use in other applications. Logging set
by default. User can disable logging.
DIGITAL INPUT 2
Reports digital input state
2
Reports digital input 2 status on application Status screen. Update rate: 10
- 30 seconds. Can be pointed out for use in other applications. Logging set
by default. User can disable logging.
DIGITAL INPUT 3
Reports digital input state
3
Reports digital input 3 status on application Status screen. Update rate: 10
- 30 seconds. Can be pointed out for use in other applications. Logging set
by default. User can disable logging.
COMPRESSOR 1
Reports comm 1 relay
output status
Reports compressor 1 relay output status on application Status screen.
Update rate: 10 - 30 seconds. Can be pointed out for use in other
applications. Logging set by default. User can disable logging.
COMP 1 SAFETY
Reports status if comp 1
safety dig input
Reports compressor 1 safety digital input status on application Status
screen. Update rate: 10 - 30 seconds. Can be pointed out for use in other
applications. Logging set by default. User can disable logging.
Table 2 - XM670K_50 Property Help Explanations
