Emerson XM670K 50, Quick Start Manual

Page: 11 / 23

Document Part # 026-4275 Rev 0 Page 11 of 23
©2019 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emerson.com for the latest technical documentation and updates.
now bring the active setpoint from the
Standard Circuit to the device.)
23. Advance to the Inputs tab and repeat the
same procedure for converting the inputs
from a fixed value to a pointer.
24.The LIGHTS ON property input would
typically come from a time schedule as shown
in Figure 40 .
25.The Defrost Start property would be the
input pointed to from the Defrost Output
property from the Standard Circuit.
26. Advance to the Outputs tab. Only two
properties will be pointed back to the
Standard Circuit as shown in Figure 42 .
NOTE: If the Standard Circuit Defrost Term Type property
was not set to Thermostat, the available DEFR DV TERM 1
will not display while executing

(LOOKUP)
.
REVIEW
The XM670K_50 Dual Compressor description file
was specifically made for OEM Carter Cases.
There are 2 Inputs and 2 Outputs connecting
between the XM670K_50 Device Application and a
Standard Circuit Application. See Table 1 .
Figure 39 - Active Setpoints
Figure 40 - Lights On Output
Figure 41 - Defrost Start
Figure 42 - Outputs Tab