12
Reference Manual
00809-0200-4410, Rev BA
Section 2: Initial Connection
February 2014
Initial Connection
Figure 2-2. Setup>Time Settings
TCP/IP network settings
Prior to the Gateway being installed and connected to a live control network, it should be
configured with an IP address, as well as other TCP/IP network settings. This specific page can be
found in
“System backup” on page 14
.
Figure 2-3. Ethernet Settings
Use caution when making changes to the TCP/IP network settings. If they are lost or
entered incorrectly, the Gateway will require a factory reset (see
“Resetting to factory
defaults” on page 15
). Contact the network administrator for information on the proper
TCP/IP network settings to apply.
