18
Reference Manual
00809-0200-4410, Rev BA
Section 3: Mounting and connection
February 2014
Mounting and connection
3.1.2
Physical description
The Gateway electronics is enclosed in a polymer housing. The front of the enclosure has
connections for power, Ethernet, and serial communications. The unit is designed to be
mounted on a DIN rail inside an electronic enclosure.
3.2
Mounting
The unit can be snapped onto a DIN TS35/7.5 or TS35/15 rail system. To clip the unit onto the
DIN rail, see
Figure 3-1
.
1.
Tilt the unit at a slight angle allowing the lower lip of the chassis to catch the bottom of
the DIN rail.
2.
Apply pressure forward to snap the back of the unit securely onto the DIN rail.
Figure 3-1. Installing
