Emerson Rosemount Analytical OPM 4000, Instruction Manual

Page: 5 / 118

HIGHLIGHTS OF CHANGES (CONTINUED)
Effective January, 2007 Rev 1.1 (Continued)
Effective November, 2007 Rev 1.2
Effective October, 2008 Rev 1.3
Page Summary
Page 2-20 Revised the Beam Alignment Procedure. Replaced Figure 2-15, Alignment of the
Transceiver.
Page 4-3 Revised steps 3 and 5 under Alarm Set Point Adjustments, Alarm Time Delay
Adjustments, and Auto Cal Timer Adjustments.
Page 5-3 Revised the logo on the zero jig in Figure 5-2.
Page 6-4 Revised step 3 under Zero Cal Value and Span Cal Value.
Page 9-1 thru 9-2 Revised Section 9, and added three new spare parts.
Page A-2 thru A-24 Added note 11 to the safety data section. Added new language translations.
Page B-1 Updated the return of materials address.
Back Cover Updated the address blocks.
Page Summary
Page 2-1 Added note regarding installed path length.
Page 2-2 Clarified transceiver distance from stack exit.
Page 2-7 Added note regarding installed path length.
Page 2-15 Added information on recommended transceiver to control room cable.
Page 7-3 Deleted two year maintenance recommendations.
Appendix C Added Appendix C.
Page Summary
Throughout Updated revision level and date.
TOC Updated Table of Contents.
D-1 through D-10 Added Appendix D, OPM 2000 Retrofit Instruction
I-1, I-2 Updated Index of terms.
Back cover Revised e-mail addresses and copywrite date.