NOTICE
Installation considerations
Ensure only qualified personnel perform the installation.
Verify the operating atmosphere of the transmitter is consistent with the appropriate hazardous locations certifications.
Device must be installed to ensure a minimum antenna separation distance of 8 in. (20 cm) from all persons.
CAUTION
Individuals who handle products exposed to a hazardous substance can avoid injury if they are informed of and understand the
hazard. If the product being returned was exposed to a hazardous substance as defined by Occupational Safety and Health
Administration (OSHA), a copy of the required Safety Data Sheet (SDS) for each hazardous substance identified must be included
with the returned goods.
CAUTION
The products described in this document are NOT designed for nuclear-qualified applications.
Using non-nuclear qualified products in applications that require nuclear-qualified hardware or products may cause inaccurate
readings.
For information on Rosemount nuclear-qualified products, contact your local Emerson Sales Representative.
CAUTION
Install and tighten process connectors before applying pressure.
Avoid contact with the leads and terminals. High voltage that may be present on leads can cause electrical shock.
If the sensor is installed in a high-voltage environment and a fault or installation error occurs, high voltage may be present on
transmitter leads and terminals.
WARNING
Failure to follow safe installation and servicing guidelines could result in death or serious injury.
Ensure only qualified personnel perform the installation.
WARNING
Explosions could result in death or serious injury.
Before connecting a handheld communicator in an explosive atmosphere, ensure the instruments are installed in accordance with
intrinsically safe or non-incendive field wiring practices.
Verify the operating atmosphere of the transmitter is consistent with the appropriate hazardous locations certifications.
WARNING
Electrical shock can result in death or serious injury.
Use extreme caution when making contact with the leads and terminals.
3
