4
Commissioning
4.1
Safety messages
Instructions and procedures in this section may require special precautions to ensure the
safety of the personnel performing the operations. Information that potentially raises
safety issues is indicated by a warning symbol ( ). Refer to the following safety messages
before performing an operation preceded by this symbol.
WARNING
Failure to follow these installation guidelines could result in death or serious injury.
Ensure only qualified personnel perform the installation.
Explosions could result in death or serious injury.
Before connecting a handheld communicator in an explosive atmosphere, ensure the
instruments are installed in accordance with intrinsically safe or non-incendive field wiring
practices. Verify that the operating environment of the device is consistent with the
appropriate hazardous locations certifications.
Electrical shock could cause death or serious injury.
Use extreme caution when making contact with the leads and terminals. Device must be
installed to ensure a minimum antenna separation distance of 8 in. (20 cm) from all
persons.
4.2
Verify operation
There are three methods available to verify operation:
•
Field Communicator
•
Gateway’s integrated web interface
•
AMS
™
Suite Wireless Configurator or AMS Device Manager
If the Rosemount 708 Transmitter was configured with the network ID and join key, and
sufficient time has passed, the transmitter will be connected to the network. If network ID
and join key were not configured, reference
Note
It may take several minutes for the device to join the network.
Reference Manual
Commissioning
00809-0100-4708
June 2022
Rosemount 708 Wireless Acoustic Transmitter Reference Manual
21
